flexible, compact, stylish, universal, adaptive, unique....
The new Lunara Smart LED floodlights adapt to your needs at the touch of a button.
Using the supplied remote control, you can adjust the light colour from 2400 Kelvin (historic warm white) over 3000 Kelvin (warm white) to 4000 Kelvin (neutral white) at any time and vary the light output in 3 steps: 50%, 75%, 100%.
A 50-watt floodlight therefore has a power consumption of between 25-50 watts and the 100 watt version from 50-100 watts. These 2 models therefore adapt perfectly to your requirements and the area to be illuminated. The housing is made of attractive, robust aluminium. In addition to a pressure compensation valve, the floodlight has a sensor interface.
An inexpensive Plug’n’Play sensor can be installed at any time. The infrared sensor has a compact design and can be adjusted in terms of alignment and detection range. The maximum detection range within a radius of 120° is 8 metres.
A special feature is the residual light function! Using the remote control, the sensor can not only be switched on and off, but a distinction can also be made between three operating modes.
Mode 1: 100% light when motion is detected and permanently off at the end of the adjustable hold time (10 seconds to 15 minutes) until the next detection
Mode 2: 100% light when motion is detected and 10% permanent residual light (orientation light) at the end of the hold time until dusk
Mode 3: as Mode 2 but with 20% permanent residual light (orientation light)
Permanent ambient lighting deters thieves and supports your surveillance cameras in the dark and ensures improved video recordings.
2400 Kelvin is a very insect-friendly light colour and ideal for illuminating historic buildings and brick façades. 3000 Kelvin works well in rural areas and has a cosy effect. 4000 Kelvin is the perfect light colour for modern buildings with bright facades.
Unrivalled application possibilities at the touch of a button
Using an example, we would like to briefly explain the possibilities offered by the innovative concept of Lunara Smart floodlights. Your floodlights usually run on the light colour 4000 Kelvin and serve as a deterrent for thieves with a residual brightness of 10% during the night. The motion sensor is activated and switches to full brightness when a person approaches the house. At the weekend you are having a garden party with friends, and you prefer a cosy atmosphere. You take the infrared remote control and change your set-up from the comfortable from the floor in just a few steps. Step 1: Deactivate the motion sensor and switch the light on permanently. Lower the light level to 50% and select a light colour of 2400 Kelvin, for example. Done. Nach der Party einfach wieder die regulären Einstellungen aktivieren.
All these features make the Lunara Smart series a highlight of the Litegear® Round & Square series.